A10-5800K APU, Anybody Tried it yet?

[zsx]

I've gotten to test this with a few different setups as i've upgraded my cpu over the past year from an A6-5400K with 8gb 1600Mhz ram and a old 320gb HDD to a [email protected] with 7970@1050Mhz/1500Mhz and 1tb seagate HDD on windows 8.
I remember that even on the A6 the game was slightly playable note i had it OC'd to 4.3GHz or 4.2GHz can't remember witch one but that was like a constant 10fps on low like super low@1280x1024. When i upgraded to the A10 i noticed significant impromments roughly 20fps on the highest preset at the time ,high, this was with a 4.5GHz overclock@1280x1024 that i achieved with a hyper 212 cooler no prob. I have tried time and time again to push my processor over 4.5GHz but it always results in blue screens or other strange issues. Recently I managed to get it to 4.6GHz but I had to increase the vcore to an insane 1.6v not sure if all A10s are as limited as mine this worked but i started to notice after a day or two some issues so i went back to 4.5GHz. A few months later i got a asus radeon 7770 ghz edition with 2GB GDDR5 i noticed that that also made a nice improvement in my fps 30fps on ultra setting that now existed this was on the 1080p monitor i got several months after getting the 7770.
as of this november i get about 20-30 fps in the biggest battles but it feels relatively smooth specs are as follows.
cpu: [email protected]
mobo: F2A85-v pro
memory: 8GB DDR3 1600MHz 9-9-9-24 dual channel OC'd@1866MHz 10-11-11-28
storage: 1Tb seagate 7200RPM
GPU: gigabyte 7970 3GB GDDR5 reference cooler design this card seems to overclocks very well got 1200MHz core/ 1600MHz mem but i had to up the voltage and it was a bit to much for my psu that is in great need of an upgrade
PSU: thremaltake tr-2 500W probably going to upgrade to a corsair rm850 or ax850i i want to make sure i have plenty of headroom if i want to crossfire 7970s
some optimizations that helped me with my lag problems:
unpark cpu optimization seems to help a lot
large link address aware(not really that much use anymore)
set timer resolution